Summary of the content on the page No. 1
www.seuservice.com
2nd PRINTING AUG
Deluxe Version
OWNER’S MANUAL
SEGA ENTERPRISES, INC. USA
MANUAL NO. 4201-6507-01
Summary of the content on the page No. 2
VISIT OUR WEBSITE!
Summary of the content on the page No. 3
BEFORE USING THE PRODUCT, BE SURE TO READ THE FOLLOWING: To maintain the safety: To ensure the safe usage of the product, be sure to read the following before using the product. The following instructions are intended for the users, operators and the personnel in charge of the operation of the product. After carefully reading and sufficiently understanding the warning displays and cautions, handle the product appropriately. Be sure to keep this manual nearby the product or elsewhere convenient
Summary of the content on the page No. 4
Specification changes (removal of equipment, conversion and addition) not designated by SEGA are not allowed. The parts of the product include warning labels for safety, covers for personal protection, etc. It is very hazardous to operate the product by removing parts and or modifying the circuits. Should doors, lids and protective parts be damaged or lost, refrain from operating the product, and contact where the product was purchased from or the office herein stated. SEGA shall not be held
Summary of the content on the page No. 5
TABLE OF CONTENTS BEFORE USING THE PRODUCT, BE SURE TO READ THE FOLLOWING: TABLE OF CONTENTS INTRODUCTION OF THE OWNER’S MANUAL 1. HANDLING PRECAUTIONS ................................................................................................ 1 2. PRECAUTIONS CONCERNING INSTALLATION LOCATION ........................................ 2 - 3 3. OPERATION ........................................................................................................................... 4 - 5 4.
Summary of the content on the page No. 6
SPECIFICATIONS Installation Space : 1,310 mm (W) X 2,830 mm (D) (51.6 in. X 111.4 in.) Height : 2,660 mm (104.7 in.) Weight : 370 kg. (815.7 lbs.) Power, maximum current : 600 W 6.7 A (AC 110V 50 Hz AREA) 600 W 6.7 A (AC 110V 60 Hz AREA) 580 W 6.0 A (AC 120V 60 Hz AREA) 590 W 3.5 A (AC 220V 50 Hz AREA) 580 W 3.4 A (AC 220V 60 Hz AREA) 600 W 3.4 A (AC 230V 50 Hz AREA) 580 W 3.2 A (AC 230V 60 Hz AREA) 600 W 3.2 A (AC 240V 50 Hz AREA) 590 W 3.2 A (AC 240V 60 Hz AREA) For TAIWAN Po
Summary of the content on the page No. 7
DEFINITION OF LOCATION MAINTENANCE MAN AND SERVICEMAN Non-technical personnel who do not have technical knowledge and expertise should refrain from performing such work that this manual requires the location's maintenance man or a serviceman to carry out, or work which is not explained in this manual. Failing to comply with this instruction can cause a severe accident such as electric shock. Ensure that parts replacement, servicing & inspections, and troubleshooting are performed by the locatio
Summary of the content on the page No. 8
1. HANDLING PRECAUTIONS When installing or inspecting the machine, be very careful of the following points and pay attention to ensure that the player can enjoy the game safely. Non-compliance with the following points or inappropriate handling running counter to the cautionary matters herein stated can cause personal injury or damage to the machine. Before performing work, be sure to turn power off. Performing the work without turning power off can cause an electric shock or short circuit.
Summary of the content on the page No. 9
2. PRECAUTIONS CONCERNING INSTALLATION LOCATION This product is an indoor game machine. Do not install it outside. Even indoors, avoid installing in places mentioned below so as not to cause a fire, electric shock, injury and or malfunctioning. Places subject to rain or water leakage, or places subject to high humidity in the proximity of an indoor swimming pool and or shower, etc. Places subject to direct sunlight, or places subject to high temperatures in the proximity of heating units,
Summary of the content on the page No. 10
Electric current consumption MAX. 8.70 A (AC 110V 50 Hz) MAX. 8.30 A (AC 110V 60 Hz) MAX. 7.70 A (AC 120V 60 Hz) MAX. 4.50 A (AC 220V 50 Hz) MAX. 4.30 A (AC 220V 60 Hz) MAX. 4.20 A (AC 230V 50 Hz) MAX. 4.00 A (AC 230V 60 Hz) MAX. 4.10 A (AC 240V 50 Hz) MAX. 3.90 A (AC 240V 60 Hz) MAX. 8.30 A (For TAIWAN) STOP For transporting the machine into the location's building, the minimum necessary dimensions of the opening (of doors, etc.) are 1.2m(W) and 1.7m(H). IMPORTANT! For the operatio
Summary of the content on the page No. 11
3. OPERATION PRECAUTIONS TO BE HEEDED BEFORE STARTING THE OPERATION To avoid injury and trouble, be sure to constantly give careful attention to the behavior and manner of the visitors and players. In order to avoid accidents, check the following before starting the operation: Check if all of the adjusters are in contact with the surface. If they are not, the Cabinet can move and cause an accident. 1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890
Summary of the content on the page No. 12
PRECAUTIONS TO BE HEEDED DURING OPERATION (PAYING ATTENTION TO CUSTOMERS) To avoid injury and trouble, be sure to constantly give careful attention to the behavior and manner of the visitors and players. To avoid injury and accidents, those who fall under the following categories are not allowed to play the game. • Those who need assistance such as the use of an apparatus when walking. • Those who have high blood pressure or a heart problem. • Those who have experienced muscle convulsion or l
Summary of the content on the page No. 13
4. NAME OF PARTS 29 inch monitor FRONT CABINET Accel.& Brake Pedal Clutch Pedal Steering Wheel Billboard Coin chute door Cashbox door REAR CABINET FIG. 4 a OVERVIEW 6-speed shift Effect switch AC unit FIG. 4 c REAR VIEW FIG. 4 b TABLE 4 Width X Length X Height Weight FRONT CABINET 2,080 mm X 780 mm X 1,649 mm 401 kg REAR CABINET 1,190 mm X 1,480 mm X 1,649 mm 187 kg When assembled 2,080 mm X 2,260 mm X 1,833 mm
Summary of the content on the page No. 14
5. ACCESSORIES When transporting the machine, make sure that the following parts are supplied. The printer is available in this product as an optional. The printer prints Player's game results on the paper exclusively used for this product. Contact where you purchased the product from and mention the following Kit No. for an order. Detailed installation method is explained in the Kit Manual contained in the Kit. KIT NO. : XKT-0440-EX1 DESCRIPTION: PRINTER KIT FOR FRI DX EXP TABLE 5 A
Summary of the content on the page No. 15
VOL CONT B-5K OHM SW MICRO TYPE SW MICRO TYPE 220-5484 509-5387 (2) 509-5636 (2) (1) 220-5373 Spare, see Section 9. Spare, see Section 10. Spare, see Section 9, 11, 12. FUSE 6.3A 250W CARTON BOX 514-5086-6300 (1) 601-10577 (1) Spare, see Section 17. Used for transporting the Game Board. Refer to Next Page. TAMPERPROOF†SCREW 008-B00830-0B (2) Used for installing BILLBOARD. see 2 of Section 6. www.seuservice.com 8
Summary of the content on the page No. 16
HOW TO USE THE CARTON BOX When requesting for the replacement/repair of this product's Game Board STOP (NAOMI BOARD), follow the instructions below. Transporting the Game Board in an undesignated status is unacceptable. An erroneous handling can cause parts IMPORTANT! damage. • Put the Game Board in the Carton Box together with the Shield Case. Do not unnecessarily disassemble nor remove parts. • By paying careful attention to the direction shown by the following Figure, put the Shield Ca
Summary of the content on the page No. 17
6. ASSEMBLING AND INSTALLATION Perform assembly work by following the procedure herein stated. Failing to comply with the instructions can cause electric shock hazard. Perform assembling as per this manual. Since this is a complex machine, erroneous assembling can cause an electric shock, machine damage and or not functioning as per specified performance. When assembling, be sure to use plural persons. Depending on the assembly work, there are some cases in which working by one person
Summary of the content on the page No. 18
When carrying out the assembling and installation, follow the following 6-item sequence. ASSEMBLING THE CABINET 1 INSTALLING THE CENTER ROOF AND THE BILLBOARD 2 SECURING IN PLACE (ADJUSTER ADJUSTMENT) 3 POWER SUPPLY CONNECTION 4 TURNING POWER ON 5 ASSEMBLING CHECK 6 The master key (accessories) in addition to the tools such as a Phillips type screwdriver, wrench for M16 hexagon bolt, socket wrench, Ratchet Handle for M6, M8 hexagon bolt, Tamperproof†wrench (accessories) are required for the asse
Summary of the content on the page No. 19
ASSEMBLING THE CABINET 1 1 Install the Joint Bracket L and 2 Joint Bracket R to the both sides of Front Cabinet, and 2 Joint Pipes to the inside. At this time, temporarily install the Joint Brackets L and R. JOINT BRACKET R JOINT PIPE Hexagon Bolt(2 each) M8 X 30,w/spring washer, flat washer used. Hexagon Bolt(4 each) JOINT BRACKET L M8 X 20,w/spring washer, flat washer used. FIG. 6. 1 a Hexagon Bolt(2) M8 X 30,w/spring washer, flat washer used. Connect the Earth. 2 Connect the wiring from th
Summary of the content on the page No. 20
Insert the Front Cabinet's Joint pipes into the Rear Cabinet's square holes to fit both cabinets 3 tight. Be sure to perform this work by 2 or more workers. Also, be careful so as not to pinch the wiring. Secure the joint portion of the 4 Cabinets with 6 Hexagon Bolts. Firmly secure the Joint Brackets L&R, respectively. By using Joint Plate Center, secure 5 the joint portion of the Cabinets with 4 Truss screws and Hexagon Bolts. JOINT BRACKET R HEXAGON BOLT (2 each) M8 X 20,w/spring washer, fl
