Summary of the content on the page No. 1
®
SUPER
SUPERSERVER 5014C-MF
USER’S MANUAL
Revision 1.0a
Summary of the content on the page No. 2
The information in this User’s Manual has been carefully reviewed and is believed to be accurate. The vendor assumes no responsibility for any inaccuracies that may be contained in this document, makes no commitment to update or to keep current the information in this manual, or to notify any person or organization of the updates. Please Note: For the most up-to-date version of this manual, please see our web site at www.supermicro.com. SUPERMICRO COMPUTER reserves the right to make chang
Summary of the content on the page No. 3
Preface Preface About This Manual This manual is written for professional system integrators and PC technicians. It pro- vides information for the installation and use of the SuperServer 5014C-MF. Instal- lation and maintainance should be performed by experienced technicians only. The SuperServer 5014C-MF is a high-end single processor 1U rackmount server based on the SC513L-260 server chassis and the Super P8SCT motherboard. The P8SCT supports single Intel® Pentium® 4 LGA775 ("Prescott")
Summary of the content on the page No. 4
SUPERSERVER 5014C-MF User's Manual Chapter 4: System Safety You should thoroughly familiarize yourself with this chapter for a general overview of safety precautions that should be followed when installing and servicing the SuperServer 5014C-MF. Chapter 5: Advanced Motherboard Setup Chapter 5 provides detailed information on the P8SCT motherboard, including the locations and functions of connectors, headers and jumpers. Refer to this chapter when adding or removing processors or main me
Summary of the content on the page No. 5
Preface Notes v
Summary of the content on the page No. 6
SUPERSERVER 5014C-MF User's Manual Table of Contents Preface About This Manual ...................................................................................................... iii Manual Organization ................................................................................................... iii Chapter 1: Introduction 1-1 Overview ......................................................................................................... 1-1 1-2 Motherboard Features ..............
Summary of the content on the page No. 7
Table of Contents HDD ........................................................................................................ 3-2 Power ...................................................................................................... 3-3 Chapter 4: System Safety 4-1 Electrical Safety Precautions ........................................................................... 4-1 4-2 General Safety Precautions ............................................................................. 4-
Summary of the content on the page No. 8
SUPERSERVER 5014C-MF User's Manual Wake-On-Ring ......................................................................................... 5-16 SATA LED ................................................................................................ 5-16 Serial Ports ............................................................................................. 5-16 Power LED .............................................................................................. 5-16 5-10 Jumper Settings ..
Summary of the content on the page No. 9
Table of Contents 7-4.1 Advanced BIOS Features .............................................................. 7-5 7-4.2 Advanced Chipset Control ............................................................. 7-6 7-4.3 I/O Device Confi guration ............................................................... 7-8 7-4.4 PnP/PCI Confi guration .................................................................. 7-9 7-4.5 Hardware Monitors .........................................................
Summary of the content on the page No. 10
SUPERSERVER 5014C-MF User's Manual Notes x
Summary of the content on the page No. 11
Chapter 1: Introduction Chapter 1 Introduction 1-1 Overview The Supermicro SuperServer 5014C-MF is a high-end single processor, 1U rack- mount server with state-of-the-art features. The 5014C-MF is comprised of two main subsystems: the SC513L-260 1U chassis and the P8SCT motherboard. Please refer to our web site for information on operating systems that have been certifi ed for use with the 5014C-MF. In addition to the mainboard and chassis, various hardware component
Summary of the content on the page No. 12
SUPERSERVER 5014C-MF User's Manual 1-2 Motherboard Features At the heart of the SuperServer 5014C-MF lies the P8SCT, a single processor motherboard based upon Intel's E7221 chipset. Below are the main features of the P8SCT. Processor The P8SCT has a single LGA775 ZIF socket to support an Intel® Pentium® 4 ("Prescott" type) processor with hyper-threading technology at an 800/533 MHz FSB speed or a single Intel® Celeron® processor at a 533 MHz FSB speed. Please refer to the support sectio
Summary of the content on the page No. 13
Chapter 1: Introduction Onboard Controllers/Front Side Ports An onboard IDE controller supports one fl oppy drive and up to four Ultra ATA 100 hard drives or ATAPI devices. Front side ports include one COM port, one parallel (printer) port, two USB ports, PS/2 mouse and keyboard ports, a graphics port and two Gigabit LAN (NIC) ports. Other Features Other onboard features that promote system health include voltage monitors, a chassis intrusion header, auto-switching voltage regulators, chas
Summary of the content on the page No. 14
SUPERSERVER 5014C-MF User's Manual Figure 1-1 . Intel E7221 Chipset: System Block Diagram Note: This is a general block diagram. Please see Chapter 5 for details. 1-4
Summary of the content on the page No. 15
Chapter 1: Introduction 1-3 Server Chassis Features The SuperServer 5014C-MF is built on the SC513L-260 1U rackmount server chassis. The SC513L-260 features a unique design that places all I/O ports at the front of the chassis for easy access. The following is a general outline of the main features of the SC513L-260 chassis. System Power When confi gured as a SuperServer 5014C-MF, the SC513L-260 chassis includes a single 260W power supply. Serial ATA Subsystem The SC513L-260 chassis was
Summary of the content on the page No. 16
SUPERSERVER 5014C-MF User's Manual Cooling System The SC513L-260 chassis has an innovative cooling design that features one 10-cm blower-type system cooling fan. The blower fan plugs into a chassis fan header on the motherboard and an air shroud channels the airfl ow to effi ciently cool the processor area. A fan speed control setting in BIOS allows fan speed to be determined by system temperature [the recommended setting is 3-pn (Server)], see page 7-11. Figure 1-2. Front I/O Panel 1-6
Summary of the content on the page No. 17
Chapter 1: Introduction 1-4 Contacting Supermicro Headquarters Address: SuperMicro Computer, Inc. 980 Rock Ave. San Jose, CA 95131 U.S.A. Tel: +1 (408) 503-8000 Fax: +1 (408) 503-8008 Email: marketing@supermicro.com (General Information) support@supermicro.com (Technical Support) Web Site: www.supermicro.com Europe Address: SuperMicro Computer B.V. Het Sterrenbeeld 28, 5215 ML 's-Hertogenb
Summary of the content on the page No. 18
SUPERSERVER 5014C-MF User's Manual Notes 1-8
Summary of the content on the page No. 19
Chapter 2: Server Installation Chapter 2 Server Installation 2-1 Overview This chapter provides a quick setup checklist to get your SuperServer 5014C-MF up and running. Following the steps in the order given should enable you to have the system operational within a minimal amount of time. This quick setup assumes that your 5014C-MF system has come to you with the processor and memory prein- stalled. If your system is not already fully integrated with a motherboard,
Summary of the content on the page No. 20
SUPERSERVER 5014C-MF User's Manual Choosing a Setup Location - Leave enough clearance in front of the rack to enable you to open the front door completely (~25 inches). - Leave approximately 30 inches of clearance in the back of the rack to allow for suffi cient airfl ow and ease in servicing. - This product is for installation only in a Restricted Access Location (dedicated equipment rooms, service closets and the like). Warnings and Precautions! ! ! Rack Precautions - Ensure that
