Summary of the content on the page No. 1
Summary of the content on the page No. 2
Congratulations on purchasing your Trio Personal Media Player! To get the most out of your purchase, please take the time to carefully read through this manual. Foreword If any problems occur during while using your Trio, please feel free to contact Mach Speed technical support at 580-272-0035, or sending an email to mssupport@machspeed.com. Thank you for your support and cooperation! Mach Speed Technologies bears no responsibility for any damage or loss of personal data due to misu
Summary of the content on the page No. 3
Avoid using your Trio under extremely hot, cold, dusty or wet environments. Striking, dropping, or severe jolts to your Trio may cause physical damage, battery loosening, or other hardware damage. The following conditions indicates a low battery level and signifies that the player should be charged: o The battery icon displays in normal operation with low battery prompt. o Where there is no response when pressing keys and the battery icon displays . o The player turns off aut
Summary of the content on the page No. 4
Appearance Basic operations 1) Power on: Set the ON/OFF switch to the ON position, and press and hold the [>II] (play/stop) button for 3 seconds. 2) Power off: Press and hold the [>II] (play/stop) button for 5 seconds, until the player powers off. You can then set the ON/OFF switch to the OFF position. Note: When battery power is low, the player will automatically power off. 3) Adjusting volume: In Music, Voice, or Movie modes, press the [VOL] button, then press [NEXT] or [PRE
Summary of the content on the page No. 5
4) Charging the player: To charge your player, set the power switch to the ON position and connect the player to a powered USB port. As a general rule, it will take 4-6 hours to completely charge the battery on the player. Main menu The main menu allows you to access the different modes of your player. You can access the main menu at any time by pressing and holding the [MENU] button. Use the [NEXT] and [PREV] buttons to navigate, and press the [MENU] button to make a selection.
Summary of the content on the page No. 6
Music Music Mode allows you to play your MP3 and WMA audio files. After entering Music Mode, you will enter the Music selection screen, which allows you to select which file you wish to play. Press [PREV] or [NEXT] to select category and press the [MENU] button to enter the category. Once you have selected a file, press the [PLAY] button to begin playing the file. Briefly pressing the [NEXT] or [PREV] buttons will skip to the next or previous track. Pressing and holding these buttons
Summary of the content on the page No. 7
over and over again), Repeat all (plays each file over and over), Shuffle (mix up the order of your audio files) and Shuffle + Repeat Select EQ- Select one of 6 equalizer settings Set Sound- Set up a customized equalizer setting, or one of several sound effects Replay Times- Set the number of times you will play your A-B sequence when A-B mode is activated Replay Intervals- set the amount if time (in seconds) between replays of your A-B sequence. Pictures Picture Mode a
Summary of the content on the page No. 8
thumbnail of the picture suing [NEXT] or [PREV] and pressing the [MENU] button. While viewing your pictures you can press the [MENU] button to enter the picture submenu, or press [PLAY] to begin showing your pictures as a slideshow Picture Submenu Rotate- Allows you to rotate the picture clockwise either 90, 180, or 270 degrees Zoom- Allows you to zoom in and out of the picture Slide Gap- Allows you to set the time a picture will be displayed before switching to the next in slid
Summary of the content on the page No. 9
Video Video mode allows you to watch your favorite AVI video files. Please ensure that you convert your video files using the enclosed video conversion software to load the necessary codecs on the file, even if your file is already in AVI video format. When you first enter video mode, you will select either “Tag List” or “Dir List”. Tag list will take you to a list of bookmarks you set for your video files (see the video submenu section). Dir List allows you to select which file you
Summary of the content on the page No. 10
one (plays a single file over and over again), Repeat all (plays each file over and over), and Shuffle (mix up the order of your video files) Add Bookmark- Set the current point in your video file as a bookmark which will quickly allow you to access it in the “Tag List” item on the video selection screen. Delete- Delete the current video file Information- Displays the file name, resolution, and frame rate Recorder Your player’s Voice recorder will allow you to make voice not
Summary of the content on the page No. 11
recording, pause the file and briefly press the [MENU] button. While in standby mode, you can press [MENU] to enter the Recorder submenu. Recorder Submenu (pictured below) Record Format- allows you to save your voice recordings either in .WAV or .MP3 format Record Quality- Allows you to set your recording quality. Higher quality recordings will be larger files Record Gain- Allows you to set your record gain Save Path- Allows you to select where so save your voice recording
Summary of the content on the page No. 12
E book EBook Mode allows you to view your text files anytime. Please ensure that the files are saved in .TXT format using Unicode encoding. When you enter the EBook mode, you will select either “Tag List” or “Dir List”. Tag list will take you to a list of bookmarks you set for your text files (see the Ebook submenu section). Dir List allows you to select which file you would like to play. Once you have selected a file, the file will display automatically. While viewing your files you
Summary of the content on the page No. 13
as a bookmark which will quickly allow you to access it in the “Tag List” item on the EBook selection screen. Delete the file- Delete the current file Tools The Tool mode allows you to access and use several common tools Stopwatch- When you enter stopwatch mode, press the [PLAY] button to begin the timer, and press [PLAY] again to stop. Pressing the [MENU] button allows you to clear the data Calculator- Accesses
Summary of the content on the page No. 14
File Navigation File navigation allows you access and play that file you have a need for without having to first enter a specific play mode. use the [NEXT] or [PREV] buttons to highlight an item you would like to access, and press the [PLAY] button to access it. Audio files will play in the music mode, video files in the video mode, etc. Setting Your system setting controls the look and controls of your player. Effect Setting- Allows you select one of three menu change style
Summary of the content on the page No. 15
Date & Time- To adjust the date or time you will use [NEXT] and [PREV] to adjust the value of the item, and [MENU] to change the item. When done, press [PLAY] to save the changes Display- Display allows you to change several display settings o Backlight- allows you to adjust the length of time before the backlight will power off to conserve the battery when the player is idle. Off will disable this feature, and keep the backlight lit constantly o Backlight Brightness- Adjust you
Summary of the content on the page No. 16
music as we fall asleep Language- Set your display language Advanced- Settings recommended for Advanced users only. COMPUTER COMMUNICATION Using Windows Media Player (Note: you must use Windows Media Player 10 or later to use this feature.) (Note: this player does not support DRM encrypted audio files, such as those downloaded from the Windows Media Player download service.) (Note: In order to use these features, you must select “Power & Data” on your player when first c
Summary of the content on the page No. 17
2. Once you have named your MP3 player, select Finish, and your Windows Media Player will open to the Sync tab. 3. Drag your music to the sync list (on the right of the screen) from 16
Summary of the content on the page No. 18
the list on the left. Once you have selected the music you wish to add to the player, press Sync. 3. Windows Media player will load the songs on to your MP3 player. 17
Summary of the content on the page No. 19
4. Once all the songs you have added are synced to the unit, and Windows Media Player says that is safe to disconnect your MP3 player, disconnect the device. 18
Summary of the content on the page No. 20
COPY AND PASTE 1. Connect the MP3 player to a working USB port. 2. When the unit is connected to your computer, it will create a gray and green icon in the system tray (lower right hand corner of your desktop). The icon will be called safely remove hardware. 3. Go to the “My Computer” section of your computer. In there you will find a section called “devices with removable storage” 19
