Summary of the content on the page No. 1
Lucas Control Systems
Deeco Systems
EM-C061
14" Flat Panel Display
Embedded Computer Module
USER MANUAL
Manual P/N: 15062
Manual Revision: 1.0
Manual Revision Date: June 1997
Summary of the content on the page No. 2
Summary of the content on the page No. 3
How to contact Deeco Systems for sales or technical support: Lucas Control Systems, Deeco Systems 31047 Genstar Road Hayward, California USA 94544-7831 Phone: 1-800-376-1154 or 510-471-4700 FAX: 510-489-3500 General E-mail: sales@deeco.com Internet: http://www.deeco.com Technical Support E-mail: LDTECHSUPPORT@COMPUSERVE.COM Technical Support BBS: 510-471-5402 Baud Rate: up to 14400 Baud Data Bits: 8 Parity: None Stop Bits: 1 Flow Control: XON/OFF Emulation: ANSI Europe Phone: 49-7024-9712-1
Summary of the content on the page No. 4
Warning!! Grounding circuit continuity is vital for safe operation of the machine. Never operate the machine with the grounding conductor disconnected. See installation instructions before connecting to the supply. The computer system contains voltages capable of producing a dangerous electrical shock. Only properly trained and authorized personnel should access the computer. CAUTION: DISCONNECT POWER BEFORE SERVICING.
Summary of the content on the page No. 5
Table of Contents 1.0 OVERVIEW............................................................................................................................. 1 1.1 PRODUCT SUMMARY............................................................................................................ 1 1.2 INDUSTRIAL COMPUTERS ................................................................................................... 2 1.3 SINGLE BOARD COMPUTER ........................................................
Summary of the content on the page No. 6
8.4 SINGLE BOARD COMPUTER................................................................................................ 27 9.0 COMPONENT TEST PROCEDURE.................................................................................... 29 9.1 POWER SUPPLY..................................................................................................................... 29 10.0 COMPONENT INSTALLATION AND REMOVAL.......................................................... 33 10.1 TOUCH CONTROLLER
Summary of the content on the page No. 7
EM-C061 Computer User Manual 1.0 Overview Lucas Control Systems, Deeco™ Systems offers a complete line of rugged computers, VGA monitors, and terminals. These products are available in sealed standalone enclosures, with panel mount brackets, and as embedded modules. All Deeco Systems products are available with touch systems for a complete user interface. Deeco Systems has manufactured quality flat panel display based products for harsh and industrial applications for more than a decade. The EM-
Summary of the content on the page No. 8
EM-C061 Computer User Manual 1.2 INDUSTRIAL COMPUTERS Deeco computers are designed for industrial conditions and exposure to harsh environments including extended high and low temperatures, high and low humidity, and severe shock and vibration. The optional sealed front bezel meets NEMA 4/12 (IP65) requirements. Deeco computers are available with Deeco’s Power Assist factory automation software, which speeds implementation of the EM-C061 in industrial control applications. Experienced Applica
Summary of the content on the page No. 9
EM-C061 Computer User Manual 1.4 ORDERING INFORMATION Base System Configuration Select a Computer and Chip Set *a ❏ 123 Full Size ISA/PCI SBC, 100 MHz Pentium ❏ 120 Full Size ISA/PCI SBC, 133 MHz Pentium ❏ 121 Full Size ISA/PCI SBC, 166 MHz Pentium ❏ 122 Full Size ISA/PCI SBC, 200 MHz Pentium Select Memory 72-Pin EDO SIMM ❏ 211 8MB SIMM ❏ 212 16MB SIMM ❏ 213 32MB SIMM ❏ 214 64MB SIMM Select a Display ❏ 3261 XGA (1024 x 768) up to 4K colors, 13.8", AM Color TFT LCD Upgrades and Options Select a
Summary of the content on the page No. 10
EM-C061 Computer User Manual Floppy Drive ❏ 600 Mounted Floppy Drive (Rear Access) PC/104 Semiconductor Disks ❏ 1010 2MB on PC/104 Card ❏ 1011 8MB on PC/104 Card Ethernet LAN Communications *e ❏ 904 10BASE-T (T-pair) / 10BASE-2 Software - Operating Systems ❏ 800 Microsoft Windows 3.1 ❏ 803 DOS ❏ 811 Microsoft Windows 95 ❏ 812 Microsoft Windows NT for Workstations Software - Touch Drivers ❏ 816 DOS/Microsoft Windows 3.1 ❏ 817 Microsoft Windows NT Resistive Touch Mouse ❏ 818 OS/2 Resistive Touch M
Summary of the content on the page No. 11
EM-C061 Computer User Manual 1.5 SPECIFICATIONS CPU Pentium processor up to 200 MHz L2 Cache 512K pipeline burst mode Displays 13.8" XGA (1024 x 768), AM Color TFT LCD Video Controller Chips and Technology 65XXX Memory Includes two to four 72-pin SIMM sockets supporting up to 128 MB DRAM Connectors Serial Parallel Network (optional) Keyboard Weight 26 lbs (11.82 kg) Dimensions Standard With Optional Front Panel (1502) 11.5" H x 14.4" W x 4.0" * D 12.3" H x 15.2" W x 4.0" * D (292 mm x 366 mm x 1
Summary of the content on the page No. 12
EM-C061 Computer User Manual 1.6 DISPLAY The display is color active matrix LCD incorporating amorphous silicon TFT. Graphics and texts can be displayed on the 1024 x 768 color panel. The TFT panel used is a low-reflection and higher- color saturation type. AMTFT technology is rapidly changing. The EM-C061 uses the latest technology in flat panel displays. 6
Summary of the content on the page No. 13
EM-C061 Computer User Manual 2.0 INSTALLATION Read this section prior to installing the computer. Following these steps will ensure a successful installation of the computer system. 2.1 UNPACKING Components used in these systems are electrostatic sensitive. Observe proper electrostatic discharge (ESD) procedures when unpacking and handling the computer. The shipping configuration of the EM-C061 will vary according to the options ordered. The following configuration is only a general guideline:
Summary of the content on the page No. 14
EM-C061 Computer User Manual 2.2 MOUNTING The EM-C061 is designed to be mounted in enclosures, rack-mounted, mounted in walls, and integrated in systems. Other arrangements can be used as long as these standard criteria are met: • When the unit is safely mounted the installation must be able to support at least five times the unit’s weight. The unit must be rigidly fastened so that when the touch screen is used the unit will not move or fall over. The weight of the unit is 26 lbs (11.82 kg). • T
Summary of the content on the page No. 15
EM-C061 Computer User Manual 2.4 POWER REQUIREMENTS The following table specifies the electrical requirements and capabilities of the power supplies available for the computer system. Power Supply Voltage Current Frequency Watts Option Option 703 20-36 VDC 6.7 - 3.7 A DC 100 W Option 704 100-240 VAC 1.25 - 2.5 A 47-63 Hz 100 W Customer +5 8 A DC 40 W Supplied ±5, ±12V -5 1 A DC 5 W +12 4 A DC 48 W -12 1 A DC 12 W Option 703 DC Supply: Connect 20-36 V input power to the pigtail as shown: 24 VDC
Summary of the content on the page No. 16
EM-C061 Computer User Manual Customer Supplied ±5, ±12V: Connect ±5, ±12V and Ground to the pigtail as shown: +5V Ground Ground +12V -12V -5V 10
Summary of the content on the page No. 17
EM-C061 Computer User Manual 3.0 Single Board Computer Operation The separate Single Board Computer (SBC) user manual contains setup, operation, and maintenance documentation for the SBC. The SBC is factory configured by Deeco Systems, and modifications are usually unnecessary. 11
Summary of the content on the page No. 18
Summary of the content on the page No. 19
EM-C061 Computer User Manual 4.0 Touch System Refer to the manual on the Touch Driver Diskette for information on the optional touch system. Touch drivers are pre-installed at the factory and reside on the mass storage device. 13
Summary of the content on the page No. 20
